set load-balance group LB1 lb-local enable set load-balance group LB1 lb-local-metric-change disable set load-balance group LB1 sticky. The commands above create the group and add both of our PPPoE interfaces to the group. It also creates test methods to ensure that both connections are online by occasionly pinging 8.8.8.8 and 8.8.4.4.
9/11/2020 · lb-local enable lb-local-metric-change enable # show firewall modify wan-failover rule 10 { action modify description Do NOT balance LAN-LAN destination { group { address-group private-use } }, 1/30/2021 · lb-local enable lb-local-metric-change disable sticky { dest-addr disable dest-port disable proto disable source-addr enable source-port disable } }} port-forward { auto-firewall enable hairpin-nat enable lan-interface switch0 wan-interface eth0} protocols { static { interface-route6 ::/0 { next-hop-interface tun0 { } } route 0.0.0.0/0, lb-local enable . lb-local-metric-change enable . sticky {dest-addr enable . dest-port enable . source-addr enable } transition-script /config/scripts/wan-event-report.sh} Show load-balance status. Group wan_failover. interface : eth2. carrier : up. status : active. gateway : 204.144.183.37. route table : 201. weight : 100%. flows. WAN Out : 114000. WAN In : 0. Local Out : 624, set load-balance group LB1 lb-local enable set load-balance group LB1 lb-local-metric-change disable set load-balance group LB1 sticky. The commands above create the group and add both of our PPPoE interfaces to the group. It also creates test methods to ensure that both connections are online by occasionly pinging 8.8.8.8 and 8.8.4.4.
3/4/2021 · This is the final blog post in a three part series describing my experience with SpaceX’s Starlink to date. Here are the links to the first and second blog posts.
2/19/2019 · There are two failover scenarios to take into account: In the event WAN1 goes down traffic will need to be sent down WAN2. In the event WAN2 goes down traffic will need to be sent down WAN1. This means that 2 load-balance groups will need to be created to monitor each WAN independently.
